Tripadvisor Philadelphia - Stripping Hardwood Floors - Bring Back the Shine to Your Floor

It is a less costly way than replacing the entire hardwood flooring. Stripping is a commonly used technique in restoring or refinishing hardwood floors, in fact. Stripping hardwood floors of old coating and applying new coating is one way to bring back their old shine and texture. Their finishing coating also tends to decrease in color intensity over time. They tend to lose some of their shine and texture, as hardwood floors age.

It is also a lot messier. Sanding is laborious and time consuming compared to stripping them, on the downside. Sanding helps hardwood floors to last longer, in addition. The latter is a more complete and thorough process, between stripping and sanding. You may have to weigh stripping vs sanding hardwood floors, however, at some point.

Stripping would normally take less time and cleaning up is a lot easier and less messy, unlike sanding which takes several days. Is comparatively inexpensive, however, stripping. The downsides of sanding far outweigh its upsides, for many people. Not to mention you will have to rent hard-to-get tools specifically designed for sanding hardwood floors, sanding is also much more costly than stripping hardwood floors.

You'll need the following tools: for stripping hardwood floors,

Synthetic stripping pad -thick,

-wide scraper

-stripping solution

-wide putty knife

Absorbent rags -clean,

Wide paint brush -large,

Follow these steps: Preferably a corner, we recommend that you do a strip test on a small area on your hardwood floor, if you have never stripped hardwood floors before.

Smudge the solution evenly across the area, pour stripping solution on the area and using a wide paint brush. 1.

Allow the stripping solution to soak through the floor coating for about 30 minutes. 2.

It will come off easily if you allow ample time for the stripping solution to penetrate through the coating; scrape the coating using a scraper. 3.

Wipe off excess stripping solution with a wet rag. 4.

Wipe the stripped area dry immediately. 5.